2009-03-25 (Wed)
_ [debian] linux-kbuild-2.6.29 ない
linux-kbuild-2.6.28 ないといってる間に 2.6.29 が出てしまった。んでこちらもまだない。
_ [debian] 続・privoxy 3.0.11-1 変…ではない
よく考えたら flet’s で閉網なグローバル IPv6 アドレスもらってるせいか。疑ってごめん。> privoxy どっちにしろ IPv6 無効なオプションは欲しいところだなあ。
2009-03-24 (Tue)
_ [unicon] 20090324-2.6.29
前回toshiさんから頂いた修正で pending になっていたものを merge。 また、UNICON ページ に貢献者の項目を設けた。
2009-03-23 (Mon)
_ [vdr] 13:30-14:10 停電
電気工事のため停電していたようです。
_ [comp] cpufrequtils を試す
ささやかな省電力のために cpufrequtils を入れる。
# grep name /proc/cpuinfo
model name : Intel(R) Pentium(R) M processor 1500MHz
#
# lsmod | grep speedstep
speedstep_centrino 5728 0
freq_table 4224 1 speedstep_centrino
#
# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies
600000 800000 1000000 1200000 1400000 1500000
# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors
performance
#
周波数はいくつか選べるけど、governor が performance の1種類しかない。これだと常に最高周波数で動作してしまう。選べる governor を増やすには別にモジュールを読み込む必要があるみたい。
# ls -1 /lib/modules/2.6.26-1-686/kernel/drivers/cpufreq/
cpufreq_conservative.ko
cpufreq_ondemand.ko
cpufreq_powersave.ko
cpufreq_stats.ko
cpufreq_userspace.ko
freq_table.ko
#
CPU の動作状況に応じて変動する ondemand を読んでみた。
# modprobe cpufreq_ondemand
# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors
ondemand performance
#
増えた。これは /etc/modules に追加しておこう。 次に cpufrequtils の設定。
# vi /etc/default/cpufrequtils
ENABLE="true"
GOVERNOR="ondemand"
MAX_SPEED="1500000"
MIN_SPEED="600000"
#
これで起動してみる。
# /etc/init.d/cpufrequtils start
CPUFreq Utilities: Setting ondemand CPUFreq governor...CPU0...done.
# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq
600000
#
暇だからか一気に動作周波数が落ちた。